We use cookies to enhance your experience. By continuing to visit this site you agree to our use of cookies. More info.
CAT100AU - Digital Audio over CAT
Our CAT100AU Audio over CAT5e/6 extender kit transmits audio signals up to a distance of 300m (192kHz signals up to 100m). This plug-and-play device accepts both optical and coaxial digital inputs and includes a built-in DAC to enable the use of the stereo left / right audio output from either input.
Box Contents
1 x CAT100AU-TX
1 x CAT100AU-RX
1 x 5V/1A DC Power Supply
1 x Mounting Kit
1 x User Manual
-
Extend optical and coaxial digital audio signals up to distances of 300m* over a single CAT cable
-
Both optical and coaxial digital can be distributed at the same time
-
Built in DAC (Digital to Analog audio Converter) converts either optical or coaxial digital (selectable) to analog stereo left / right audio output (source selected on receiver unit)
-
Supports sample rates 32kHz, 44.1kHz, 48kHz, 96kHz and 192kHz up to 24-bit resolution
-
Ultra low jitter and high fidelity design
*CAT100AU supports distances of up to: 192kHz - 100m, 96kHz - 150m, < 48kHz - 300m
CAT100AU-TX:
-
Audio Input Connectors: 1 x optical (S/PDIF) & 1 x RCA (S/PDIF)
-
Connectors: 1 x RJ45
CAT100AU-RX:
-
Input Connectors: 1 x RJ45 & 5V/1A DC
-
Output Connectors: 1 x optical (S/PDIF), 1 x RCA (S/PDIF) & 1 x analog Left / Right - 3.5mm stereo audio jack
-
Balun Dimensions (W x D x H): 65 x 80 x 25mm (with connections)
-
Balun Dimensions (W x D x H): 65 x 70 x 25mm (without connections)
-
Ind. Balun Weight: 0.13kg (excluding accessories)
-
Carton / Box Dimensions (W x D x H): 210 x 125 x 95mm
-
Shipping Weight: 0.6kg
-
Operating Temperature: 32°F to 104°F (0°C to 40°C)
-
Storage Temperature: -4°F to 140°F (-20°C to 60°C)
-
Power Supply: 5V/1A DC, barrel type connector
-
Power supplied to the transmitter unit from the receiver